Inconel 600 / 601 Flanges

Inconel 600 Flanges, UNS N06601 Inconel Threaded Flanges, ANSI B16.5 Inconel 601 Ring Type Joint Flanges, ASME / ASTM SB564 Inconel 601 Orifice Flanges, Inconel 600 Forged Flanges, Inconel 601 Lap Joint Flanges Manufacturer in Mumbai,India.

Nickel Super Alloys is one of the prominent suppliers, manufacturers and exporters of Inconel Alloy 600 / 601 Flanges, which is face-centered cubic lattice structure. Inconel 600 Slip On Raised Flanges continues in use as an excellent muffle construction material. Inconel 601 Blind Raised Flange sare typically used in high temperature applications. Inconel 600 Spectacle Blind Flanges has excellent oxidation resistance up to 1093 Degree C combined with high carburization resistance. For Inconel 601 Weld Neck Flanges, slight changes in the relative amounts of sulfur and elements that tend to tie up sulfur cause large differences in ductility. Inconel 600 Threaded Flanges is often used in the chemical industry, electrical, nuclear, heat treating industry, and aeronautical fields. The high nickel content of Inconel 601 Socket Weld Flanges provides exceptional resistance to chloride-ion SCC.

Inconel 600 Lap Joint Flanges are normally preferred for handling concentrated and high temperature caustic. Inconel 601 Ring Joint Type Flanges has many different industrial applications, some of which include food processing and nuclear engineering. The cold work hardening rate in Inconel 600 Spacer Flanges is less than that of stainless steel 304 yet higher than that of mild steel. Inconel 601 Long Weld Neck Flanges provides excellent resistance to alkaline solutions. Inconel UNS N06600 Flanges also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions. Inconel WNR 2.4816 Flanges is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures in the range of 2000 degree F.

Alloy 601 Spacer Ring Flanges, Inconel 601 Nippolet Flangs, Inconel 601 Flanges, Inconel UNS N06601 Plate Flanges, Werkstoff Nr. 2.4816 / 2.4851 Slip on Flanges, ANSI B16.5 Alloy 600 Socket weld Flanges Suppliers in India.

Key Charactristic:

• Corrosion resistance
• Resistance to oxidation and sulfidation
• Cryogenic strength
• Resistance to abrasion and erosion
• Surface finish
• Magnetic properties
• Ductility
• Elevated temperature strength
• Stability of properties in service
• Suitability for intended fabrication techniques

Grade	Inconel Alloy 600 / UNS N06600
Standard	ASTM B564, ASME SB564
Dimensions	ANSI / ASME B16.5, B16.47 Series A & B, B.16.48, BS4504, BS10, DIN, EN-1092, MSS SP44
Size	1/2" - 48" (15NB - 1200NB)
Class / Pressure Rating	150 Class, 300 Class, 600 Class, 900 Class, 1500 Class, 2500 Class, PN6, PN10, PN16, PN25, PN40, PN64, etc.
Form	Slip on Flanges (SORF), Threaded Flanges, Weld neck Flanges (WNRF), Blind Flanges, Socket weld Flanges, Lap Joint Flanges, Ring Type Joint Flanges, Spectacle Blind Flanges, Spacer Ring Flanges, Long weld Neck Flanges, Nipo Flange, Nipolet Flanges, Plate Flanges, Flat Flange, Orifice Flanges, Forged Flanges
Flange Face Type	Flat Face (FF), Raised Face (RF), Ring Type Joint(RTJ)

Standard	Inconel 600
UNS	N06600
GOST	МНЖМц 28-2,5-1,5
BS	NA 13
JIS	NCF 600
AFNOR	NC15FE11M
WERKSTOFF NR.	2.4816
EN	NiCr15Fe
OR	ЭИ868

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 600	0.15 max	1.00 max	0.50 max	0.015max	0.50 max	6.00 – 10.00	72.00 min	14.00 – 17.00
Inconel 601	0.10 max	1.00 max	0.50 max	0.015max	1.00 max	Balance	58.0 – 63.0	21.0 – 25.0

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.47 g/cm3	1413 °C (2580 °F)	Psi – 95,000 , MPa – 655	Psi – 45,000 , MPa – 310	40 %

---

Countries We Export to

Cities We Deliver to